RIK-PM40
Seismic Beam Clamp
Product code: RIK-PM40
With the highest seismic load ratings of any beam clamp on the market the RIK-PM40 Seismic Beam Clamp has been specifically developed for demanding bracing applications.
Easy Setup - Designed to eliminate drilling in to structural steel on construction sites
Strong - Machined from high tensile solid steel bar for superior strength
Secure - Welding not required
High load rating - ULS of over 10.93kn – 24.04kn / 1115kg – 2452kg. Higher load ratings available on request
Tip embedment - The bolt tip is designed to embed into the structural steel to prevent slipping
Roughened surface - The horizontal roughness of the saw tooth jaw maximises grip to the beam
Torque bolt head - Snaps off once optimal torque is achieved to allow easy visual inspection
Adaptable installation - 0-90° attachment range
Design Specifications
Shear-off bolt head
Hardened steel pointed bolt tip
Roughened surfaces
TESTING & SPECIFICATIONS
The RIK-PM40 Seismic Beam Clamp has been tested in accordance with ANSI/ASHRAE Standard 171-2017, Method of Testing for Rating Seismic and Wind Restraints.
In 2008, the first ANSI/ASHRAE standard was published for testing seismic restraint devices. This standard described the testing procedures for seismic restraint systems. The objective of these tests was to determine the capacity of seismic restraints/braces. The tests were designed to determine the maximum force a restraint can withstand without breakage or permanent deformation.
The standard has been updated in 2017 and comprises a cyclical, low-frequency test method and establishes a rating methodology for use with building codes.
These tests are designed to be conducted by ISO accredited testing laboratories with equipment calibrated according to ISO 17025.
REFERENCES: 1. ISO. 2005. ISO 17025, General Requirements for the Competence of Testing and Calibration Laboratories. Geneva, Switzerland: International Organisation for Standardisation.